Publicidad
Idiomas disponibles
Idiomas disponibles
English
Safety instructions
• Protect the product against moisture
• Avoid anti-static electricity when installing the product
Hardware Installation
1.
Turn off your PC and unplug the power cord.
2.
Open the housing.
3.
Remove the panel from the available bay.
4.
Insert the hub into the bay and screw it to the housing.
5.
Connect the USB cable to the USB port of the hub and to a free internal 19
pin USB port on your motherboard.
6.
Then connect the power cable to the hub and a free SATA power connector.
7.
Reattach the housing and connect the power cord to the AC adapter.
Driver Installation
1.
Switch on your computer.
2.
The hub will be recognized and you can start using the device immediately.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 07/2023
-3-
Publicidad
