Publicidad
Idiomas disponibles
Idiomas disponibles
UNPACKING AND INSPECTION
After opening the carton, unpack your new product and related parts and accessories. Please
inspect it carefully for any damage that may have occurred during transit. Please check it against
the photograph on carton. If any parts are missing, please call customer service at 1-800-497-0552
between 6 a.m. and 5 p.m. Pacific time.
WARNING: DO NOT operate this product if damaged during shipment, handling or misuse.
Do not operate the product until the parts have been replaced or the fault rectified. Failure to do
so may result in serious personal injury or property damage. All damaged parts must be repaired
or replaced as needed prior to operating this product. Check to see that all nuts, bolts and fittings
are secure before putting this product into service.
If you have any questions, or require assistance with damaged or missing parts, please contact
our customer service department at 1-800-497-0552. Please have the serial number, model
number, and date of purchase available for reference when calling.
SAFETY INFORMATION
• Operate in a safe work environment. Keep your work area clean, well-lit and free of
distractions. Place lights so you are not working in a shadow.
• Keep anyone not wearing the appropriate safety equipment away from the work area.
• Never engage in horseplay with the tool. Respect the tool as a working implement.
• Always wear impact safety goggles that provide front and side protection for the eyes. Eye
protection equipment should comply with CSA Z94.3-07 or ANSI Z87.1 standards based on
the type of work performed.
• Wear gloves that provide protection based on the work materials or to reduce the effects of
tool vibration.
• Wear protective clothing designed for the work environment and tool.
• Non-skid footwear is recommended to maintain footing and balance in the work environment
• Wear steel toe footwear or steel toe caps to prevent a foot injury from falling objects.
SPECIFIC SAFETY INFORMATION
WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace
strict adherence to the tool safety rules. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
• Use the correct tool for the job. This tool was designed for a specific function. Do not modify
or alter this tool or use it for an unintended purpose.
• Do not use the tool if any parts are damage broken or misplaced. Repair or replace the parts.
• Make sure a raised vehicle is supported with axle stands and wheel chocks. Set the vehicles
parking brake. Check the owners manual on the correct gear for a manual vehicle.
• Ensure the hydraulic brake system is not under pressure before cracking the bleed screw.
3
Publicidad
