SNOWJOE SUNJOE 24V-X2-21LM Manual Del Operador página 11

Fig. 6
Upper
handle
frame
Lower handle
frame
Handle latch
3. Flip up the latches to lock the handle in place (Fig. 7).
Fig. 7
Flip up the
latch
4. Use the cable clips to secure the cable on the handle
frame (Fig. 8).
Fig. 8
Cable clips
Grass Collection Bag Fitting
1. Lift the ejector flap up, and remove the mulching plug
inserted in the rear discharge opening.
2. With the ejector flap lifted up, hold the grass collection
bag by the handle and hook the ends of the support rod
on the hooks on both sides (Fig. 9).
Grass collection bag
3. Release the ejector flap so that it rests on the grass bag.
(Fig. 10).
Fig. 10
Ejector flap
Grass
collection
bag
Side Discharge Chute Assembly + Fitting
Use the side discharge chute on your mower when the grass
is too tall to mulch or when side discharging is preferred. The
grass clippings produced by the side discharge chute are
noticeably larger than those produced by the mulching plug.
NOTE: When using the side discharge chute, do not assemble
the grass collection bag. Insert the mulching plug in the rear
discharge opening.
1. Lift up the side discharge door.
2. Align the grooves on the side discharge chute with the
pins on the underside of the door, and hook the grooves
on the pins (Fig. 11).
11
Ejector flap
Support rod
(on both sides)
Hook (on
both sides)
Fig. 9