NAMI ELECTRIC Klima Manual Del Usuario página 29

BASIC MODE SETTINGS P1
• Once you are in the P1 setting, you will
see the following drive mode displayed:
E / D / S / C / X as shown in the photo
below. Press the M button once and one
of the Riding Mode signals start to flash.
• Please use the + and - buttons to
select the driving mode and access the
advanced settings.
• Press the M button to select the mode.
After the advanced setting is complete,
press the M button twice to return to the
main setting.
• Each of the driving modes will have
7 sub-parameters for adjustment,
listed below.
• Each of the driving mode settings is
independent and you can set it to your
preference and change the driving mode
during the ride to suit your surroundings.
When you are on the advanced tuning
system, one of the E / D / S / C / X driving
modes will be displayed on the instrument
panel. It refers to the specific driving mode
you set.
Advanced parameter 1:
Adjustment of the acceleration power of
the rear engine starting which varies from
1 to 5.
1 refers to the weakest starting power and
5 to the strongest starting power.
Advanced parameter 2:
Adjustment of the starting acceleration
power of the front and rear engine which
varies from 1 to 5.
1 refers to the weakest starting power and
5 to the strongest starting power.
Advanced parameter 3:
Adjustment of the maximum allowed
output current of the rear motor which
varies from 10 to 100.
The maximum allowable output power is
shown in% to the rear motor.
Advanced parameter 4:
Adjustment of the maximum allowable
current output of the front motor which
varies from 10 to 100.
The maximum allowed output current is
indicated in% to the rear motor.
For E mode, the maximum power is
limited to 40%.For D / S / C / X modes, the
maximum power is unlimited.
DASHBOARD
Settings
Advanced parameter 5:
Adjustment of the maximum speed
which varies from 1 to 100.The maximum
permitted output current is indicated in %.
For E mode, the maximum power is
limited to 40%. For D / S / C / X modes, the
maximum power is unlimited.
Advanced parameter 6:
Electric braking power adjustment which
varies from 0 to 5.0 means that no electric
brake is engaged.
1 refers to the weakest electric brake5
refers to the most powerful electric brake.
Advanced parameter 7:
Turbo adjustment which varies from 0 to 5.
The turbo setting gives the scooter 12%
more top speed when set to maximum.
0 refers to deactivating turbo mode.
1 refers to the weakest turbo.
Once the turbo mode is activated and if
the temperature of the controller and the
battery charge are adequate,
The TURBO pictogram will appear on the
instrument panel.
While driving, by pressing the + button
for 1 second, the turbo mode will be
active and will be displayed on the
instrument panel.
USER MANUAL - EN 29