Publicidad
Idiomas disponibles
Idiomas disponibles
Fine Tuning
The fine tuning selection mode gives the possibility to set the temperatures by sublevels (15
in totals); each temperature level has four sublevels.
How to use the fine tuning function:
•
Press the SET key for 8 seconds to enter fine tuning selection mode. When the
appliance enters the mode, an acoustic signal is made and the LED of currently
selected cooling level blinks.
•
By short pressing the SET key within 5 seconds, the fine tuning setting increases
and, at each pressing, an acoustic signal is made.
•
During fine tuning, the LED of the selected cooling level is fixed, while the LED
of the selected sublevel blinks.
•
If no key is pressed for 5 seconds, the system automatically exits from fine tuning
selection mode. The fine tuning setting is saved and the LED of the selected fridge
temperature is fixed.
•
If the fine tuning is activated again, the setting will start from the previously stored
level.
Super Cool function
It is suggested to switch on the Super Cool function if a large quantity of food should be
stored (for example after the purchase). The Super-Cool function accelerates the cooling of
fresh food and protects the goods already stored from undesirable warming. When the
function is activated, the temperature of the fridge is automatically set at 2 °C.
How to use the Super Cool function:
•
Press many times the SET key until the Super Cool LED is turned ON; the
function is activated (suggestion: turn ON 11hrs before loading).
•
To exit the Super Cool function, press the SET key again.
•
The Super Cool function automatically ends after 30 hours running.
•
When the Super Cool ends, the corresponding icon of the control panel turns off
and the previously set cooling level is restored.
Defrosting
The defrosting of the refrigerator and freezer compartments are done automatically: no
manual operation is needed.
Slider
Near the vegetable basket there is a slider that allows you to adjust the humidity inside it:
moving it to the right decreases the humidity, moving it to the left increases the humidity.
Demo mode
Keeping pressed the door switch inside the refrigerator, if the SET key is pressed for 5
seconds, the refrigerator will enter the Demo mode. To exit the mode, keep pressed the door
switch and press again the SET key for 5s.
Error codes
If 4 °C LED light is flashing, it means there has been a fan error. Please, contact the technical
assistance to help solve the problem
5
Publicidad
