Keeper KP 295 Manual De Uso página 79

ELECTRIC PRUNING SHEARS
• Blade will be hurt or jammed if cutting bigger branch forcedly.
• Do not move the tool during the pruning shear cutting, it can cause danger.
• Do not use the device in rain or humidity environment.
• If the pruners stop working during long term use and you hear 4 fast
beeps, this is an indication of undervoltage protection which means the
battery is depleted. Please charge as soon as possible.
• Switch off the device after use and remove the battery from the pruner.
• If no operation for 10 minutes, the pruner switches off automatically.
Caution: please check battery charge level or blade sharpening when
cutting is difficult or not smooth.
14.1. CUTTING CONTROL MODE
The KP295 electric pruning shears has two cutting control modes:
• Non-progressive cutting control
• Progressive cutting control
NON-PROGRESSIVE CUTTING CONTROL
When the pruning shear is turned on, the non-progressive cutting control is
predetermined, that is, when the trigger is actuated the blade performs the
cutting action, and when the trigger is released the blade opens.
PROGRESSIVE CUTTING CONTROL
To change the control mode, you must hold the trigger for 2 seconds until you
hear an audible warning (a beep), which indicates that you have changed from
normal cut control mode to progressive cut control mode.
In the progressive cutting control, the blade moves according to the depth of
the trigger drive, that is, if the trigger is activated halfway, the blade moves
progressively halfway through its opening.
www.gruposanz.es
79