Hoover PMP 2400 Manual De Instrucciones página 9

Chapter 2.5 - Refilling the Water Tank During Usage
You can fill the water tank at any time during use.
Open the water tank cover (5) and refill the water tank with the help of a bottle of water without
exceeding the max mark level.
Please refer to chapter 1.2 for more detailed instructions.
Chapter 3: Maintenance and Cleaning
All the maintenance and cleaning operations have to be done when the unplugged appliance has cooled
down for at least 2 hours, to prevent any risk of burns.
Chapter 3.1 - Cleaning the Appliance
Do not use any detergent or descaling products for cleaning the soleplate. Regularly clean it with a damp,
non- metallic pad.
Empty the water tank after each use before storing it. To empty the water tank, press the trigger to release
steam until no steam come out.
To clean the plastic parts of the stand, please use soft clothes.
Chapter 3.2 - Filter Cassette Replacement
The appliance contains a filter cassette (12) to reduce scale deposits, this considerably prolongs the
operational life of your iron.
The filter cassette is a single part under the tray and can be replaced.
Chapter 3.3 - Storage
Switch off the appliance and unplug it.
Empty the water tank. to empty the water tank, press
the trigger to release steam until no steam come out.
Put the iron on the heat-resistant iron silicon pad (4).
Wait at least 30 minutes allowing the soleplate and the
generator to cool down.
Store the power cord in cord storage (1), and store the
steam hose in the steam hose storage (9).
Then you can take away your appliance in order to store it safely and easily.
7 GB
Fig. 7: Filter Cassette Replacement
Fig. 8: Cord Storage