Publicidad
Idiomas disponibles
Idiomas disponibles
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press "V+" button to increase the volume. Press "V-"
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press "P-" button to select the previous
programme.
• Press "P+" button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between 10-500 (for IDTV) or 10-199 (for analogue),
press the numeric buttons consecutively
• Press directly the programme number to reselect
single digit programmes
Initial Settings
When the TV is turned on for the first time, the menu
for the language selection appears on the screen. The
message "Welcome please select your language!"
is displayed in all language options sequentially in
the OSD.
By pressing the " " or " " buttons highlight the
language you want to set and press OK button.
Afterwards, "First time installation" OSD will appear
on the screen. By pressing " " or " " buttons, select
the country you want to set and press OK button (*
for EU countries).
Note: Country selection OSD will not be available for UK.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
• To select the "Yes" or "No" option, highlight the item
by using " " or " " buttons and press the "OK"
button.
The IDTV will automatically tune to the UHF or VHF(*)
(* for EU countries) transmission channels, searching
for digital terrestrial TV broadcasts and displaying
the names of channels found. This process will take
about a few minutes.
All manuals and user guides at all-guides.com
After Automatic Search is completed, the following
message asking for analogue channel search appears
on the screen:
To search for analogue channels, select "Yes". TV
switches to the analogue TV mode. The menu is
displayed to search for analogue channels.
Select your Country, Language and Text language
by using " " or " " and " " or " " buttons. Press
OK or RED button to continue. To cancel, press the
BLUE button.
For more information on this process, see "Install
Menu" section.
Note: For proper functioning of digital teletext in DTV mode,
you should set country as UK in analogue AUTO PROGRAM
(for UK broadcasts only).
Do not turn off the TV while initializing first time installation.
Press the "SOURCE" button on the remote control
and select DTV to switch the TV set to digital terrestrial
television broadcasting.
Information Banner
• Whenever you change channel, using the P- / P+
• The information banner can also be displayed at
If the selected channel is locked, you must enter the
correct four numeric code to view the channel. "Enter
PIN" will be displayed on the screen in such a case:
English - 43 -
General Operation
button or the numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen (available only in DTV
mode). This will remain on the screen for a few
seconds.
any time while watching TV by pressing the "INFO"
button on the remote control:
Publicidad
