Publicidad
INSTALLATION: Fixed Arm Mount
STEP 4: When installing to a square or round pole, align the holes of the fixed arm bracket and pole, pass the fixing screws
through both holes, then put iron bar inside of pole to attach with fixing screws.
STEP 5A: Pass the fixture's AC input wires through the
pole, pull them out together at top of pole and prepare wire
connections. Go to STEP 6A.
STEP 6A: Push the connected wires inside of the pole,
close the pole's top cover, then close the junction box cover
by tightening the fixing screws.
(continued)
NOTE: When installing to a round pole, remove the
rubber gasket.
STEP 5B: Pass the pole wires into the fixed arm
bracket, pull them out together with fixture's AC wire
from junction box. Connect the fixture's AC input wires
to pole wires with connectors. L to L (Black), N to N
(White), PE to PE (Green). Go to STEP 6B.
STEP 6B: Push the connected wires into bracket
junction box, close the box cover by tightening the fixing
screws, then close the poles top cover.
5
Publicidad
