Publicidad
INSTALLATION: Fixed Adapter Arm Mount
STEP 6A: Push the connected wires inside of the pole,
close the pole's top cover, then close the junction box cover.
PHOTOCELL INSTALLATION, OPTION 1: Fixed Adapter Arm Mount
Punch out the photocell knock-out on the fixed adapter arm bracket with a hammer. Follow STEPS 1 – 4 on page 8. Install
photocell base and waterproof gasket on the fixed adapter arm bracket, then tighten screws. Screw the photocell and
shorting cap into photocell base. Follow STEPS 6A or 6B above to complete installation.
NOTE: See page 10 for photocell wiring diagram.
PHOTOCELL INSTALLATION, OPTION 2: Fixed Adapter Arm Mount
Fix the photocell plate to the fixed adapter arm bracket, unscrew with screwdriver to take off photocell plate. Follow STEPS
1 – 4 on page 8. Install photocell base and waterproof gasket on the fixed adapter arm bracket, then tighten screws. Screw
the photocell and shorting cap into photocell base. Follow STEPS 6A or 6B above to complete installation.
NOTE: See page 10 for photocell wiring diagram.
(continued)
STEP 6B: Push the connected wires into fixed adapter
arm junction box, close the box cover, then close the
poles top cover.
9
Publicidad
