Publicidad
Idiomas disponibles
Idiomas disponibles
Dust extraction (Fig.1)
Connect the dust collection bag to the dust extraction connector (6). Check the filling level, and empty
frequently. It is possible to employ and external vacuum by using a suitable adapter (ask in shop). Always work
with a dust extraction system connected.
Switching on and off (Fig.2)
1. Connect the plug to a power socket
2. Switch on continuous operation, press button(2)
3. Switch off continuous operation: press button(2)
Sanding
1. Position the entire sanding surface on the piece of work
2. Switch the machine on and guide it over the surface to be sanded using circular motions. Do not apply
additional pressure to the machine when sanding, the weight of the machine itself is usually sufficient to
ensure optimum revolutions and a good result. Do not tip! Complete several sanding processes using sand
paper that gradually gets finder.
Polishing
1. Apply polish using a cross-coat method and allow drying slightly before polishing. When you have
completed your work, reduce the pressure, lift the machine from the piece you are working on, and then switch
the machine off.
CLEANING AND MAINTANCE
CAUTION! Before performing any care or maintenance work, disconnect from the power.
Use a dry brush to clean the dust extraction openings. Clean the housing with a damp cloth only – do not use
solvents! Then dry well. Remove the dust collection bag from the plastic section to empty. Empty carefully, try
not to create dust. Do not breathe in saw dust! Wash out the bag in cold soapy water and allow drying.
Before each use, check the machine, the cable and accessories to ensure that they are not damaged. Have
any necessary repairs completed by a specialist.
Machines that no longer function properly should be disposed off correctly in accordance with the
local regulations.
ENVIRONMENT
Do not dispose of electric tools, accessories and packaging together with household waste material - in
observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life must be
collected separately and returned to an environmentally compatible recycling facility.
8
www.ELITETOOLS.co
Keep Working
Publicidad
