Descargar Imprimir esta página

Hilti PS 85 Manual De Instrucciones página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
2. To switch the measuring tool off, press the on/off button.
5
FCC statement (applicable in US) / IC statement (applica-
ble in Canada)
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by taking
the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to a power outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced TV/radio technician for assistance.
Changes or modifications not expressly approved by Hilti may restrict
the user's authorization to operate the equipment.
This device complies with the requirements set out in Paragraph 15 of the
FCC rules and fulfills the requirements defined in RSS­220 in combination
with the RSS-Gen of IC.
Operation is subject to the following two conditions:
This device shall cause no harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.
For users in the USA: Operation of this device is restricted to law enforce-
ment, fire and rescue officials, scientific research institutes, commercial
mining companies, construction companies and private parties operating
on behalf of these groups. Operation by any other party is a violation of 47
U.S.C. § 301 and can result in serious legal penalties.
Coordination requirements
1. UWB imaging systems require coordination through the FCC before the
equipment may be used. The operator shall comply with any constraints
on equipment usage resulting from this coordination.
2. The users of UWB imaging devices shall supply operational areas to the
FCC Office of Engineering and Technology, which shall coordinate this
information with the Federal Government through the National Telecom-
munications and Information Administration. The information provided by
16
English
2327817
*2327817*

Publicidad

loading