Carat DPZ0200000 Manual De Instrucciones página 10

12. Ajustez la position de l'anneau de guidage du
rouleau avant avec celle de la lame.
Galet avant
Anneau de
guidage
Lame
Couper
1. Relâchez la vis moletée et ajustez la position
de la base à la profondeur de coupe requise.
2. L'échelle indique la profondeur de coupe
approximative lorsque la ligne de base est
alignée avec la marque de guidage.
Échelle
Ligne
de base
Marque de
guidage
Base
Profondeur de coupe
Vis moletée
NE PAS soulever ou reculer la meuleuse d'angle car cela entraînerait la dispersion de la poussière.
Carat Nederland B.V.
www.carat-tools.nl | www.carat-tools.com
www.carat-tools.be | www.carat-tools.dk
18
13. Attachez la poignée à la porte M8 / M10.
Poignée
Porte M8
Porte M10
3. Tenez solidement la meuleuse et la poignée.
4. Allumez l'interrupteur de l'aspirateur et de la
meuleuse d'angle.
5. Mettez le rouleau avant sur le matériau, puis
avancez lentement la meuleuse d'angle .
Couper
Direction
Galet avant
Rotation de
la lame
Instruction manual - English
DPZ0200000 Dust extraction
WARNING
• DO NOT use DPZ0200000 with the angle grinder which can NOT be fitted correctly as instructed
in this manual.
• DPZ0200000 is only for cutting concrete, block, and tile. DO NOT use for cutting steel or
other materials.
• DPZ0200000 must be used with the Vacuum suitable for the concrete dust.
• DPZ0200000 is only for 115-125mm Diamond cutting blades. DO NOT use with abrasive wheels
or tipped saw blades.
• Always check DPZ0200000 for damage, cracks, or deformation before use.
• DO NOT use DPZ0200000 if it is cracked, damaged or bent as this could lead to injury.
• Be sure to wear the protective goggles, dust mask, protective foot wear, earplugs and other
protective equipment when working.
• Keep DPZ0200000 away from gasoline, solvents, and paraffin.
• Ensure the cutting material securely clamped before cutting.
Explanation of the pictograms:
General Read the operating Wear
Warning. instructions before use. eye protection.
Specifications:
Model Code DPZ0200000
Suitable Blade 115-125mm T1.5-2.2mm Diamond Blades
Cut Depth 5-25mm (125mm Blade) 5-20mm (115mm Blade)
Weight 690g (Main Unit with adaptor system)
Work material Concrete, Block, and Tile
Suitable Makita / BOSCH / Dewalt / Milwaukee / Metabo / HiKOKI / FLEX 115-125mm
Angle Grinders class small angle grinder
Can NOT be fitted.
* Based on the web
as of 2022 Jan.
Makita / BOSCH: X-LOCK type
Dewalt : D28137/ DCG405FN type
Milwaukee : AGV10-125EK, AG10-125EK,
AG800-125EK type
Wear breathing Wear Wear protective gloves.
protection. ear protection.
Sub Plate NK-SPMA
is required separately.
Metabo WEPBA17-125 / WEBA17-125/
WEA17-125 / WEVA15-125 / WA13-125 /
WEA11-125 WPB13-125 / WB18LTBL11-125 /
WVB18LTBL11-125 / WPB18LTBL11-125 type
HiKOKI G13SB4, G13SE3, G13BAWQZ,
G13BY, G13YG type
19