Publicidad
Idiomas disponibles
Idiomas disponibles
6. Keep holding [B] Adapting Unit and tighten the Bolt with [D] Wrench securely.
D
Bolt
7. Set [H/I/K] Spacer, [G] Base
Lock Nut
Flange or Original Flange,
and Blade into the Spindle
then tighten the Lock Nut by
Blade
Wrench.
G
or Original Flange
H/I/K
Refer to the
Installation
Guide
8. Hang the Shaft of [A] Main
Unit into the Hook of
[B] Adapting Unit.
24
For some grinders, tighten 3 screws originally used for fixing
the Guard.
HD28AG-125, AGV17-125, AG16-125, AG8-125, AG9-125 type
(OLD type)
L3410FR, L3410VR type
Wrench
Spindle
B
Haak
As
9. Rotate [A] Main Unit toward
[B] Adapting Unit with Shaft
as axis.
10. Tighten [C] Bolt with [D]
Wrench. Make sure that the
rear end of [B] Adapting Unit
is securely hooked.
11. Hold [A] Main Unit and connect the Vacuum Hose into the Duct with [M] Joint.
A
A
Kanaal
M
Afzuigslang
Do NOT hold the grinder when
connecting the Vacuum Hose.
D
C
25
Publicidad
