2- Alarm Messages - BSV BSPOOL BSsalt-10 Manual De Usuario

4.4.1.1- Additional warning messages
ORP or PPM value is
flashing
pH value is flashing
Value ---o (Water
temperature) is flashing
Filter time

4.4.2- Alarm Messages

I n the follow ing cases, the chlorinator shuts dow n and the alarm and
acoustic alarm LED is activated (autom atic reset once the fault is solved):
"NO WATER
FLOW"
"SHORT CIRCUIT"
Manual EVO v.4
The redox
chlorine probe
balanced in automatic
mode. When the probe
is balanced, the value
remains set.
The pH probe
balancing. When
probe is balanced, the
value remains set.
The value of the water
temperature
15º.
The equipment
switched off before the
time set in
automatic
Excess gas in
electrolysis cell. It may
have occurred because the
pump has shutdown. The
gas is hydrogen gas which
is highly flammable.
Sensor cable of the cell is
incorrectly connected or
broken.
Cell sensor is dirty.
No water flow
The cell is incorrectly
connected.
Metal body in the cell.
or free None.
are
is None.
the
Consider the use of a
is under winter
product.
has Restart the filtering cycle
semi-
the The piping should be drained to
eliminate gas or accumulated
water. Check the pump.
Check the sensor cable (white
cable)
Clean.
See maintenance.
Check the water system
Check wiring.
Turn off the equipment and
remove the metal body from the
plates
hibernator
104 / 166