Chemical Balance Of The Water - BSV BSPOOL BSsalt-10 Manual De Usuario

chlorinator, in which case it will automatically stop working and water will have
to be added to reduce the concentration.
We also recommend not to add salt near the drain, to avoid undissolved salt
from circulating in the water circuit.

2.2 Chemical balance of the water

The effectiveness of chlorination and the quality of water for healthy bathing,
depends largely on the pH of the water. Therefore, it should be checked
regularly and adjusted as necessary.
There are other parameters which should be considered for the correct
operation of the salt water chlorinator. We recommend an in-depth analysis of
the water when installing a salt water chlorinator.
Parameter
PH
FREE CHLORINE (mg/l)
COMBINED CHLORINE (mg/l)
TOTAL BROMIDE (mg/l)
BIGUANIDE (mg/l)
ISOCYANURIC ACID (mg/l)
OZONE (GLASS) (mg/l)
OZONE (before)
TURBIDITY (NTU)
OXIDES (mg/l)
NITRATES (mg/l)
AMMONIA (mg/l)
IRON (mg/l)
COPPER (mg/l)
ALKALINITY (mg/l)
CONDUCTIVITY (us/cm)
TDS (mg/l)
HARDNESS (mg/l)
Manual EVO v.4
Minimum Maximum
Value
7.0
0.5
--
3.0
25
--
--
0.4
--
--
--
--
--
--
100
--
--
150
Value
7.8
2.5
0.6
6.0
50
<75
0
--
<1
<3
<20
<0.3
<0.3
<1.5
160
<1700
<1000
250
64 / 166