Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION:
•Be sure no foreign material enters the crankcase.
•Do not tilt the generator when adding engine oil. This could result in overfilling and damage to the engine
•Clean the oil filter every other 100hr.
3） AIR FILTER
Maintaining an air cleaner in proper condition is very important. Dirt induced
through improperly installed, improperly serviced, or inadequate elements
damages and wears out engines. Keep the element always clean.
1. Remove the cover.
2. Remove the air filter cover and element.
3. Wash the element in solvent and dry.
4. Oil the element and squeeze out excess oil. The element should be wet but not
dripping.
5. Insert the element into the air filter.
6. Install the cover
CAUTION:
The engine should never run without the element; excessive piston and/or
cylinder wear may result.
4） CLEANING AND ADJUSTING SPARK PLUG
1. Remove the cover.
2. Check for discoloration and remove the carbon.
3. Check the spark plug type and gap.
4. Install the spark plug.
5. Install the cover
UPPER
LEVEL
Standard electrode color: Tan Color
Standard Spark Plug: see page 9
Spark Plug Gap: 0.6-0.7 mm (0.024-0.028 in)
www.ELITETOOLS.co
9
Keep Working
Publicidad
