Elite 2G10i Manual De Usuario página 28

5） FUEL TANK FILTER
1. Remove the fuel tank cap and filter.
2. Clean the filter with solvent. If damaged, replace.
3. Wipe the filter and insert it.
WARNING
Be sure the tank cap is tightened securely.
6） MUFFLER SCREEN
WARNING
•The engine and muffler will be very hot after the engine has been run.
•Avoid touching the engine and muffler while they are still hot with any part of your body or clothing during
inspection or repair.
1. Remove the cover.
2. Remove the muffler screen.
3. Use the flathead screw driver to pry the spark arrester out from the muffler
4. Remove the carbon deposits on the muffler screen and spark arrester using a wire brush.
5. Install the muffler screen.
6. Install the cover
www.ELITETOOLS.co
Keep Working
10