Publicidad
Idiomas disponibles
Idiomas disponibles
Safety
Use in accordance with the EU and national regulations. For indoor use only. Keep your device completely dry.
This product must be installed by a competent person and in accordance with all the EU and
national regulations. Always isolate the AC mains supply before installing or working on any
components that require 230V AC 50 Hz mains.
This appliance is rated IP30 and must be installed outside of the splash zones in bathrooms.
MD2 Wired Thermostat
The Herschel iQ MD2 is a 16 amp thermostat enabling up to 3.6 kW of Herschel Heaters to be
connected through a single, easy to use control. MD2 is wired directly to the mains circuit
powering the heaters. Built-in wifi enables control via the internet using the SmartLife App.
MD2 is easy to operate and incorporates Herschel's open window technology to save energy.
MD2 has a keypad locking feature to prevent unauthorised tampering with the settings and it can
be programmed to control zones up to 45°C, making it suitable for commercial use and for
specialist high temperature applications such as hot yoga studios.
MD2 features Manual, Eco and 7 day programming modes with 4 periods per day. The MD2 will
operate your Herschel heater(s) by turning them ON if the room temperature is lower than the
desired temperature and will turn them OFF once the desired temperature is reached or
exceeded.
Please read these instructions carefully. MD2 operates stand-alone, but can be paired to the
SmartLife App if internet operation is required.
Key features
• Easy to use large LCD display
• Wall installation
• 7 x 1 day programmable, 4 periods per day
• Manual, Eco and 7 Day Programme modes
• Open window function
• Keypad Lock
• 24 month warranty
MD2 Thermostat
ENGLISH
Publicidad
