Herschel MD2 Instrucciones De Instalación Y Funcionamiento página 4

Parameter Settings
With the MD2 turned Off, press the
press of the button will select the next available parameter.
Pressing and will change the individual parameter. Press
Item Description
01 Temp. Calibration
02 Max. Temp. Setpoint
03 Min. Temp. Setpoint
04 Sensor Select
05 Frost Protection Temp
06 Temp. Calibration for external sensor
07 Temp. detection by external sensor
08 Overheat protection setting
09 Dead Zone
11 Keypad Lock
12 Open Window Detect
13 OW Detect Time
14 OW Drop Temp
button for 5 seconds to enter the parameter setting. Each
Range
-8°C – 8°C
5°C – 45°C
5°C – 45°C
0 – Room Only
1 – External Only
2 – Room + External
5°C – 15°C
-8°C – 8°C
Read Only
20°C – 80°C
0 – 3°C
1: Lock 0: Unlock
1: ON
2 – 30mins
2,3 or 4°C
MD2 Thermostat
ENGLISH
to save and exit.
Default
Value
0°C
35°C
5°C
0 (Room
Only)
5°C
0°C
32°C
0°C
0 (Unlock)
0: OFF 0 (OFF)
15mins
2°C