Bosch 060160A101 Manual Original página 19

toward the rear. Loosen both wing bolts 27 to
adjust the angle. Adjust the desired angle using
the scale 28 and tighten wing bolts 27 again.
Routing with the Side-handle
Subbase (see figure
The side-handle subbase 32 can be mounted in
place of guide plate 6. It offers an additional
handle 29 as well as a connection possibility for
dust extraction.
Unscrew the four fastening screws on the bot-
tom side of the guide plate 6 and remove the
guide plate. Screw the side-handle subbase 32
to the base plate as shown in the figure using
the countersunk screws provided.
To connect dust extraction, screw the extraction
adapter 31 to the side-handle subbase 32 with
the two screws. Connect an extraction hose with
a diameter of 19/35 mm to the extraction
adapter 31.
To ensure optimum dust extraction, the extrac-
tion adapter 31 should be cleaned regularly.
For working edges, additionally use the extrac-
tion hood 30. Mount the extraction hood as
shown in the figure.
For working smooth face surfaces, remove the
extraction hood 30.
The machine can be plugged directly into the re-
ceptacle of a Bosch all-purpose vacuum cleaner
with remote starting control. The vacuum
cleaner starts automatically when the machine
is switched on.
The vacuum cleaner must be suitable for the
material to be worked.
When vacuuming dry dust that is especially det-
rimental to health or carcinogenic, use a special
vacuum cleaner.
Maintenance and Cleaning
■ Before any work on the machine itself, pull
the mains plug.
■ For safe and proper working, always keep the
machine and its ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an authorized after-
sales service agent for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the nameplate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
2 609 140 541 • 22.1.08
)
R
The wires in the cable are coloured according to
the following code:
strain relief
live = brown
neutral = blue
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this machine, it must
be disposed of safely.
Disposal
Power tools, accessories and packaging should
be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Direc-
tive 2002/96/EC on waste electri-
cal and electronic equipment and
its incorporation into national law,
power tools that are no longer suitable for use
must be separately collected and sent for recov-
ery in an environmental-friendly manner.
After-Sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
To be fitted
by qualified
professional only
English | 19