To select "Addition" mode press the addition/subtraction
key (12) with a short touch and to select "Subtraction"
mode press the addition/subtraction key with a longer
touch.
1. Press the addition/subtraction key and take the first
measurement;
2. Press the measurement key (9) and take the second
measurement. The second value will automatically be
added/subtracted to the first.
1. Press the measuring history key (13) to view the
measuring history, the last 20 measured values will be
displayed in reverse order;
2. Press the "CLEAR" key (16) to exit the measuring history
display.
Press the acoustic signal key (17) to switch it on/off.
The spirit level (2) enables the distance meter to be levelled
horizontally, thus making it easier to aim the laser at target
surfaces, especially at greater distances.
The laser distance measurer does not require any
additional maintenance. However, for a continuous and
trouble-free operation, you must perform regular cleaning
and proper maintenance tasks.
Before carrying out any checking, maintenance or cleaning
work, remove the batteries.
Cleaning
Clean all components after each use. Wipe the laser
distance measurer with a clean, damp cloth or blow it with
low pressure compressed air. Careful handling protects the
product and extends its service life.
Storage
When not in use, store the laser distance measurer in a dry,
clean place, free of corrosive smoke and out of children's
reach. Remove the battery when storing.
When not in use, store the laser in a dry, clean place,
free of corrosive smoke and out of children's reach.
Remove the battery when storing.
Never dispose of power tools and batteries with your
household waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
intended for this purpose.
According to the Directive 2006/66/EC, defective or used
battery packs and batteries, must be collected separately
and disposed of to designated collection points.
You can get information regarding the disposal of the
machines and batteries through the person in charge for
recycling in your city.
WhatsApp:
+351 965 157 064
E-mail:
support@vito-tools.com