ASROCK K7VT4A Pro Manual Del Usuario página 12

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Header
(9-pin USB67)
(see p.2 item 18)
Shared USB 2.0 Header
(9-pin JUSB45)
(see p.2 item 28)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.2 item 20)
(AUX1: see p.2 item 21)
Front Panel Audio Connector
(9-pin AUDIO1)
(see p.2 item 24)
System Panel Connector
(9-pin PANEL1)
(see p.2 item 16)
1 2 1 2 1 2
1 2 1 2
connect to the
power supply
AUX1 CD1
ASRock K7VT4A Pro Motherboard
Please connect the black end of
SATA power cable to the power
connector on the drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
ASRock I/O Plus TM provides you
6 ready-to-use USB 2.0 ports on
the rear panel. If the rear USB
ports are not sufficient, this
USB 2.0 header is available to
support 2 extra USB 2.0 ports.
This USB45 connector is shared
with the USB 2.0 ports 4,5 on
TM
ASRock I/O Plus . When using
the front panel USB ports by
attaching the front panel USB
cable to this connector
(JUSB45), the USB ports 4,5 on
TM
ASRock I/O Plus will not be able
to function.
These connectors allow you to
receive stereo audio input from
sound sources such as a CD-
ROM, DVD-ROM, TV tuner card,
or MPEG card.
This is an interface for front panel
audio cable that allows conve-
nient connection and control of
audio devices.
This connector accommodates
several system front panel
functions.