Cosmo Connected Cosmo Ride Guia Del Usuario página 8

• Replacing the Remote Control Battery
The remote control is powered by a CR2032 battery. To replace the
battery, it is necessary to remove the two (2) rear screws with a
screwdriver. Please proceed carefully in order to not damage the inside
of the remote control.
e. Important Information
i. Wireless technology
Bluetooth 4.2 Low Energy (LE) radio transmitter/receiver.
Transmitting power:
MHz.
ii.
Cosmo Ride Battery
Capacity: 900 mAh rechargeable via a micro-USB cable (included). An
indicator light will illuminate during charging. The battery life is up to 35h,
depending on the light configuration and use. You can check the battery level
of your Cosmo Ride via the mobile app.
iii. Battery Precautions
Do not attempt to replace the battery in your Cosmo Ride. It is built-in and
is not replaceable.
instructions provided in this guide. Charge your Cosmo Ride using a
computer or a certified power supply. Do not attempt to open the built-
in battery.
iv. Usage Recommendations
Do not attempt to replace the battery or disassemble your Cosmo Ride.
Any of these actions will void the warranty and may present a safety
hazard. The substances contained in the batteries may be harmful
to the environment or cause injury if handled and disposed of improperly. Do
not expose your Cosmo Ride to extreme temperatures (the Cosmo Ride is
designed to operate between 0°C and +45°C). Do not use abrasive products
to clean your Cosmo Ride product or its accessories. Do not dispose of
your Cosmo Ride in a fire. The battery could explode. Charge the
battery according to the instructions provided in this guide. Use only a
computer, power source, or charger certified by a recognized testing
laboratory with a charging cable authorized by COSMO CONNECTED.
Do not charge your Cosmo Ride when it is wet.
v. Caution
Risk of explosion if the battery is replaced with an incorrect battery. It
-8.4 dBm/frequency range:
Charge the
2400 to 2483.5
battery according to the