Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
System Functions
Using System Functions
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial and select the desired system function, and then tap OK.
3. Tap OK to change the selected function's settings or start the function.
NOTE
To return to the main screen, tap Options again or turn the Navigation dial to select Back and tap OK.
AI Pattern
This function saves frequently used cycles and settings. When you turn the function on, the washer
remembers the cycles you use most and their settings (Temp., Rinse, Spin) and displays them in frequency
order.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select AI Pattern, and then tap OK.
3. Tap OK to select On or Off.
-
The default setting is On. Set it to Off if you do not want to use this function.
-
When you turn off the function, all the saved data resets.
Alarm
You can turn on or off the sound from the washer. When this function is set to Off, the melody of cycle
completion and the power-off beep does not sound. However, the other sounds stay active.
1. Tap and hold Options for 3 seconds.
2. Turn the Navigation dial to select Alarm, and then tap OK.
3. Tap OK to select On or Off.
-
The default setting is On.
NOTE
• The setting remains unchanged even if you restart the washer.
• If you turn on Alarm after connecting your washer and the dryer with the multi-control connection
cable, the sound only plays on the multi-control panel.
• If you disconnect the multi-control connection, the sound plays on each appliance which you
manipulate.
44
English
Untitled-1 44
2022-06-10
10:44:37
Publicidad
