Publicidad
Idiomas disponibles
Idiomas disponibles
CORDLESS SMALL ANGLE FLAT-HEAD GRINDER
DCG405F
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
No-load/rated speed
Wheel diameter
Wheel thickness (max)
Spindle diameter
Spindle length
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745-2-3
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Surface grinding
=
Vibration emission value a
h,AG
Uncertainty K =
Disc sanding
Vibration emission value a
=
h,DS
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e
Cordless Small Angle Flat-Head Grinder
DCG405F
DCG405F
V
18
DC
D
WALT declares that these products described under
e
1
Technical Data are in compliance with:
Li-Ion
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-3:2011
+A2:2013 +A11:2014 +A12:2014 +A13:2015.
W
800
These products also comply with Directive 2014/30/EU and
min
-1
9000
2011/65/EU. For more information, please contact D
mm
125
the following address or refer to the back of the manual.
mm
6
The undersigned is responsible for compilation of the technical
M14
file and makes this declaration on behalf of D
mm
18.4
kg
1.8
Markus Rompel
dB(A)
83
Director Engineering
dB(A)
94
D
WALT, Richard-Klinger-Straße 11,
e
dB(A)
3
D-65510, Idstein, Germany
04.05.17
m/s
2
4.1
m/s
2
1.5
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
m/s
2
2.7
signal word. Please read the manual and pay attention to
m/s
2
1.5
these symbols.
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EnGLIsH
WALT at
e
WALT.
e
39
Publicidad
