Technoline WS 9059 Manual De Instrucciones página 14

the swimming pool to detect its water temperature.
Manual time setting

In normal mode, press and hold MODE button for 2
seconds, into the setting mode, the set item will blink
display. Press "+" or "-" buttons to adjustment the value,
Press the MODE button to confirm the item has been set
and go to the next one, the sequence of setting items is as
follows:
TIME format(12/24HR)  HOUR  MINUTE

Press the MODE button to confirm the last item to end the
setting procedures, then it will return to the normal mode.
Note:
If there is no valid operation within 20 seconds, it will
automatically return to normal time mode from the set mode.
Setting the daily alarms

In normal mode, touch the button "
the alarm ON or OFF, LCD display the "
function is ON, Then touch once "
icon will disappears from the display, the alarm function is
OFF.

In normal mode, press the "MODE" button, LCD displays
alarm time. Within 5 seconds of the alarm time display,
press and hold the "MODE" button for 2 seconds until hour
of the alarm time starts to flash. Use the "+" and "-" buttons
to set the required hour.

Press the "MODE" button to confirm your setting, the
minute of the alarm time starts to flash. Use the "+" and "-"
buttons to set the required minute.

Press the "MODE" button to confirm your setting and to
end the setting procedure.
Notes:

If there is no valid operation within 20 seconds, it will
automatically return to normal time mode from the alarm
time set mode.

The alarm will sound for 2 minutes if you do not deactivate
it by pressing any button. In this case the alarm will be
repeated automatically after 24 hours.

Rising alarm sound (crescendo, duration: 2 minutes)
EN5
" once, can set
" icon, the alarm
" button, the " "