dosatron D 20 Manual De Instrucciones página 46

INTERNATIONAL CONVERSIONS
Principle : setting at 1% ⇒ 1/100 = 1 part of concentrate for 100 parts
of water.
ex. : setting at 2% ⇒ 2/100 = 2 parts of concentrate for 100 parts of
water.
Ratio ⇒ 1/50.
FITTING THE SUCTION TUBE
If the Dosatron has already been used, please imperatively
refer to § PRECAUTIONS.
- Unscrew the nut (Fig. 12-C) at the bottom of
Fig. 12
the injection assembly and put it onto the tube.
- slide the tube onto the barb as far as it will go,
tighten the clamp.
C
ADJUSTING THE INJECTION RATE (with pressure off)
IMPORTANT ! Use no tools. Adjustment must be made when there is no
pressure in the Dosatron.
- Bring the bypass button into
the median position.
- Unscrew the blocking nut
B B
(Fig. 13-B).
- Keep it fixed while screwing
or unscrewing the transparent
ring (Fig. 13-D).
D
- adjust the guide mark (black
line) of the transparent ring on
the chosen dosage.
Fig. 13
- tighten the blocking nut
(Fig. 13-B).
REMINDER: the quantity of injected product is proportional to the quantity
of water entering the Dosatron. 1% ⇒ 1/100, which means 100 volumes of
water + 1 volume of injected products.
©
DosatRoN INteRNatIoNaL / 46