dosatron D 20 Manual De Instrucciones página 49

CLEANING AND RE-ASSEMBLING THE SUCTION VALVE SEAL
- turn off the water supply and allow the pressure to drop to zero.
- Loose the clamp on the suction hose with a screwdriver (Fig. 17-T) and
remove the suction hose.
- Unscrew and remove the black nut (Fig. 17-N).
- Pull downwards to remove the suction valve assembly.
- Remove the seal on top of the short valve (Fig. 17-C) and replace it. turn
it around the nipple in order to be sure about its correct seating. take care
not to damage the listel.
- Proceed in the same way to change the seal of the long valve (Fig. 17-L).
- also change the o-ring (Fig. 17-J).
- Re-assemble in the reverse order to the above by hand.
Fig. 17
C
L
J
N
T
©
DosatRoN INteRNatIoNaL / 49