SNOWJOE 24V-X2-SB22 Manual Del Operador página 10

Assembly
Assembling the frames
1. Secure the connection of the middle frame to lower frame
by fastening the first set of knobs and bolts on each side
(Fig 5 – 6).
Fig. 5
Fig. 6
2. Secure the connection of the upper frame to the middle
frame by fastening the second set knobs and bolts on
each side (Fig. 7).
Fig. 7
Middle
frame
Lower
frame
Middle frame
Lower frame
Knob + bolt
Upper frame
Knob + bolt
Middle frame
Discharge Chute Assembly
1. Loosen the chute deflector knob to lift the chute deflector
(Fig. 8).
Fig. 8
Chute
deflector
knob
2. Raise or lower the chute deflector to the desired height of
the snow stream and tighten the chute deflector knob
(Fig. 9).
NOTE: Do not overtighten the chute deflector knob.
Fig. 9
Chute
deflector
Attaching the chute clean-out tool
1. Attach the two included chute clean-out tool clips onto
the middle frame, then snap the tool onto the clips to
attach it to the machine (Fig. 10 – 11).
Fig. 10
Clips
10
Chute
deflector
Chute
deflector
knob
Middle frame
Chute clean-out tool