Newlux Infinity Power V4500 Petfriend Manual página 26

Cleaning or changing the HEPA air outlet filter
Replace the HEPA air outlet filter at least twice a year, and more often
if it is visibly clogged.
1. Disconnect the plug from the outlet.
2. Open the lid and remove the HEPA filter from the air outlet of the
vacuum cleaner.
3. Clean and blow the HEPA filter dry.
4. Put the clean HPEA filter back into the appliance and close the lid.
ADVERTENCIA
The filter should be cleaned by brushing and blowing. To clean more
thoroughly, rinse it with water twice a year. Water could enter the
vacuum cleaner if the filter is not completely dry. This could cause
electrical damage, so you should let it dry for 48 hours.
Do not clean the filter in a washing machine or dry it with a hair dryer.
| 26
HEPA filter