Publicidad
Idiomas disponibles
Idiomas disponibles
5 Installation
1.
>50 cm
2.
Micro-USB
3.
6 Commissioning
In cloud-based operation, a factory reset has no effect on the logout of the room control units in the Alpha Smart
App. The devices must be deleted manually in the Alpha Smart App.
Alpha Smart App
In order to use the device within an Alpha Smart Cloud, it is necessary to use the Alpha Smart App
(download via QR code).
Register in the Alpha Smart Cloud
In order for the device to integrate into the Alpha Smart system and communicate with other devices, it must first be regis-
tered in the Alpha Smart Cloud.
The following requirements must be met for the commissioning of the Alpha Smartware Gateway:
– Easily accessible and permanently installed socket with protective contact in the house installation.
– Internet access
– WiFi according to IEEE standards 802.11b, 802.11g or 802.11n (2.4 GHz) with automatic address assignment (DHCP)
and WPA or WPA2 encryption.
– Download and install the Alpha Smart App for Android from version 5.0 (on the Google Play Store) and iOS from version
13.0 (on the App Store).
Operation over an unencrypted WiFi is possible, but is not recommended.
If the Alpha Smartware Gateway was previously used on another router, it must be reset to the factory settings.
Installation
DEU
ENG
FRA
NDL
ITA
ESP
DAN
NOR
FIN
SWE
POL
RUS
15
Publicidad
