Publicidad
general
• No air pump maintenance is required.
• Recommended working pressure: 0.025bar (0.36psi).
• The appliance must be positioned so that the plug is accessible.
• For cleaning use only mild soapy solution. Do not use any chemicals.
• In case of repairs, use only common PVC repair glue and patches.
In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out this appliance must not be supplied through an
external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
Part descriptions:
1. AC line cord
2. Switch
3. Inflation mark (
NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.
Due to a policy of continuous product improvement, Intex reserves the right to change
specifications and appearance, which may result in updates to the instruction manual,
without notice.
SAVE THESE INSTRUCTIONS
INSTRUCTIONS
CAUTION
PARTS REFERENCE
6
10
4. Off mark (
5. Deflation mark (
6. Air passage
)
Page 2
(150IO) AP620C ELECTRIC PUMP ENGLISH 4.875" X 7.25" 05/06/2021
3
4
5
8
7. Cord compartment
)
8. Cord compartment cover
)
9. Inflation valve & valve cap
10. Airbed
150
English
2
1
7
9
IO
Publicidad
