Publicidad
Idiomas disponibles
Idiomas disponibles
Step 8:
Insert the seat arms (#6 and #7) into the front
support brace (#8) and back support brace (#9).
See Fig. D – Step 1 and Step 2.
Note:
1. The labels marked "L" and "R" on the seat
arms (#6 and #7) should coincide with
Figure D - Step 1 to ensure proper assembly.
2. Make sure that the holes in the supports, the
arms, and the protective covers align with one
another.
Step 9:
Open both of the seat assemblies (#10) and
attach their backs to the seat arms (#6 and #7)
and support braces (#8 and #9) by using bolts
(#19) and washers (#26). Repeat the same
procedure for both sides. See Fig. D – Step 3.
Step 10:
Place the table top (#11) onto a non-abrasive
surface, such as a carpet, with its underside
facing upwards. Fasten the table bottom front
support (#12) to the table top by using bolt (#20),
washer (#27), and plastic washer (#30).
See Fig. D – Step 4.
Step 11:
Insert the table bottom braces (#13 and #14)
into the table bottom front supports (#12).
Repeat the same procedure for both sides.
See Fig. D – Step 5 and Step 6.
Note:
The labels marked "L" and "R" on the table
bottom braces (#13 and #14) should coincide
with Figure D - Step 5 to ensure proper
assembly.
V-3
Step 1
Step 2
Step 3
7
Step 4
Step 5
Fig. D
DO NOT RETURN TO THE STORE!
STOP
PAGE 5 OF 8
7
L
10
9
12
11
13
R
12
8
9
6
R
10
6
26
19
20
27
30
Step 6
14
L
12
8
26
19
14
Publicidad
