Easypix WDV 5270HD Manual Del Usuario página 23

replace the battery cover.
• To release the memory card press the edge of the card gently.
3. Using the camcorder
Turning the Camcorder On and Off
1. Open the LCD screen to turn on the camcorder.
2. Close the LCD screen to turn the camcorder off.
Attention: You can also press Power button to turn the camcorder on/off.
To save battery power, the camcorder will automatically turns off 1/3/5
minutes after the last control accessed. You can change the power-off time
by setting the function [Auto Power off] in the Setup menu.
Change the record mode
There are three modes in this camcorder. Press the LEFT/MODE button to
change the mode, each time the LEFT/MODE button is press the mode is
changed.
5