Video
Video
Select VIDEO to adjust picture settings and improve
picture quality. You can independently customize each of
the Video Inputs to your preference to increase viewing
performance and pleasure depending upon the video
program being viewed. If RESET is selected, only the
selected input will reset to initial conditions.
Picture Mode
Use this function to choose from automatic picture
settings to optimize your TV's performance.
1. Use the CURSOR buttons
select PICTURE MODE settings (Day-Normal,
Day-Dynamic or Night).
2. Then press the SELECT button to set the mode and
return to the Video menu or press EXIT to quit menu.
3. There are 3 Picture Modes available for the customer
Day (Dynamic) , Day (Normal) and Night mode.
Day (Dynamic) is the original factory preset mode , this
can be changed by adjusting any video setting to your
desire conditions. Day ( Normal ) can be used as a
second video setting for daytime viewing. Night is set
to watch programing during nigthtime.
1. Use the CURSOR PAD
2. Press the SELECT button or the CURSOR PAD
3. Press the CURSOR PAD
4. Press MENU to return to main menu.
5. Press EXIT to quit menu.
Contrast
Use this function to change the contrast between black
and white levels in the picture.
Brightness
Use this function to adjust overall picture brightness.
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust flesh tones so they appear
natural.
Sharpness
Use this function to adjust the amount of fine detail in the
picture.
34
or
to highlight and
or
to highlight the function to be adjusted.
to select the function settings.
or
to adjust the function.
Video
Audio
Channel Manager
Locks
Timers
Setup
Move
Select
SEL
Video
Picture Mode
Day (Dynamic)
OR
Contrast
100%
50%
Brightness
Color
62%
Tint
Sharpness
50%
Color Temperature
High
Black Enhancement
High
Contrast Mode
Dynamic
Move
Select
SEL
OR
Picture Mode
Next/Prev
Select
Return
SEL
Contrast
100%
Next/Prev
Change
Return
SEL
Cable
Day (Dynamic)