Hitachi P42H4011 Guia De Funcionamiento página 6

How to set up your new HITACHI Plasma Television
AC CORD INSTALLATION INSTRUCTION
The AC cord provided with your new Plasma Television needs to be installed correctly
to avoid the AC cord from disconnecting when rotating the TV on its Table top stand.
Located on the back of the TV are 2 plastic clamps to hold the AC cord. Please follow the
instructions below.
³
Pass the AC cord through Clamp #1 and connect
it to the TV. Pull on the clamp to tighten the
AC cord to the TV.
·
The AC cord and the signal cables can all be
held together with Clamp #2.
»
Depend on the model size 42",50" or 55", the
clamp may be different shapes. Only for 50" models
the clamp #2 will be included on the accessories
bag.
6
³
·
Clamp #2: Use this clamp to hold the AC cord and
AC CORD
Clamp #1 : Pass the AC cord through this clamp ;
then pull the clamp to tighten the AC
cord to the TV.
the signal cables. For 50 " model please
assemble this Clamp on the middle hole
of the base metal.