Toshiba TCB-EXS21TLE Manual De Instrucciones página 170

Setting Up Programmed Operations
Correctly set the present time and today's day of the week.
Unless both are correctly set, the programs will not run as expected.
• Up to 3 programmed operations can be set per day for day of the week.
• To change the settings of an existing program, use the same below
procedure used to set up a new program.
STEP 1 Press the PROGRAM button
• When the PROGRAM button is pressed, today's day
of the week start blinking and the present time
indication changes to a blinking "PG-1".
STEP 2 Press the DAY button and select a day of the week for
programmed operation.
• When the SET button is pressed, the program
schedule marker (
lighting and, at the same time, the time set in program
starts blinking. Also, the present time indication
changes to a blinking "PG-2".
NOTE
• The currently selected day of the week blinks slowly at
this time.
8
) changes from blinking to
Example settings
OI-916-8-EG