Front Runner FADR002 Manual De Instrucciones página 5

2
FIT AND SECURE
2.7
3 FIT AND SECURE
3.1
3.2
2.2
3.3
Center the rack and tighten fully. Finish off by fitting the M8 Nut Caps (Item 4) on the M8 Nyloc Nuts.
FADR002_REV_A00
6
5
4
Place the Foot Rail (Item 1) on top of the
Spacers (Item 2 & 12).
Apply silicone on the threads of the M6x35
Hex Bolts (Item 9) and secure the Foot Rail
using M6 Spring Washers, M6x19x1SS Flat
Washers and Jack Nuts inserted (Items 10,
11 & 3).
Do this on both the left and right side of the
10mm
vehicle.
Finish off by placing M6 Nut Caps (Item 8) on
the M6 Hex Bolt heads.
To fit the Rack, proceed to Step 3.
Make sure that the wind deflector is
installed before you proceed to the next
step.
4MM
Fit your Roof Rack to the Foot Rails using
M8x20 Hex Bolts, M8x16x1.6SS Flat Washers
and M8 Nyloc Nuts (Items 7, 6 & 5) as
shown.
13mm
5 © 2020 FRONT RUNNER VEHICLE OUTFITTERS