Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Focus for adjusting the image quality
2.
Sensor for the remote control
3.
Power On/off
4.
Power port
5.
Infrared sensor
Figure 3
1.
Power on/off
2.
Return button
3.
Ok (confirm your choice) and forward/backward/up/down
arrows
4.
Volume + ou -
Use of the device
Installation of the projector
Place your projector on a flat, stable surface with plenty of space around it (Fig. 5). Orient the projector to
project on a white surface.
Plug in the power cable and press the power button on the projector (Fig. 1) or on the remote control (Fig.
3).
The home screen will be projected automatically (Fig. 6). Adjust the sharpness of the image using the
dial above the lens (Fig. 1).
Note: If the unit is too close to the screen, you will not be able to obtain a sharp image. In this case,
move the unit back from the screen.
1.
Home page
On the home screen, using the remote control, you can navigate through
- pre-installed applications (Facebook, Netflix, YouTube, Disney+, Spotify ...),
- the applications you have installed on the device,
- the trends proposed by the device
- the different pages existing in the device (Search, Home, Applications, Video, Music, Settings, weather
conditions).
To launch an application or go to a selected page, with the arrow on the remote control and press the "
OK " button.
2. PAGE « SETTINGS »
From the home screen, go to the device's "SETTINGS" page by navigating the menus located in the upper
left corner of the screen.
Wi-Fi connection
In the "SETTINGS" page, select "Network" (Fig. 8).
You will see on the right of the screen the list of available Wi-Fi networks. Select in the list the Wi-Fi
network you want to connect to.
Note: if your network does not appear, check that your internet box is activated. If your box is activated
but no network is visible, check that the "Wi-Fi" option is activated at the top of the column that appears
on the right of the screen.
If your Wi-Fi network is password protected, you will need to enter the password to connect.
6.
Audio output
7.
AV input
8.
HDMI input
9.
USB input
10.
SD carte input
11.
Lens
www.livoo.fr
5.
Source
6.
Mouse
7.
Infrared transmitter
8.
Menu
9.
Home page
EN
Publicidad
