Livoo DV152 Manual De Instrucciones página 19

When the 2 devices are connected, the projector will indicate it by a sound signal.
For a better sound quality of your projector, you could connect a speaker or a sound bar via Bluetooth
function. You can also connect your phone to the projector, use it as a speaker.
Note: via le Bluetooth, you will not be able to project the content of your phone.
(Fig. 9)
Boot source
Set the default boot source to AV or HDMI.
Language setting (Fig. 9)
In the « SETTING » page, select "Language", a column appears on the right of screen where you could
select the language of your choice.
Projector (Fig. 13)
To perform keystone correction, go to Home > Settings > Projector, you can choose automatic or manual
keystone correction (Fig.14).
System setting (Fig. 9)
In the « SETTING » page, select « System ». A column appears on the right of the screen from which you
could selection 3 options:
- Network and internet: via this menu you could also connect to Wi-Fi (see chapter Wi-Fi Connection)
- Device preference: in this menu, you will find the different programs:
•
About: it allows you to know the name of this device, the network status and the difference
software versions.
•
System update: please refer to software update chapter
•
date &time: this allows you to set the time zone and the format (12H/24H)
•
Applications: here you will find the different applications installed in this device, this program
allows you to open, force the shutdown, uninstall, consult used storage space, delete data,
empty the cache or delete the default values of each application.
•
Languages: see the language setting chapter.
•
Keyboard: here you can find information about the virtual keyboard of the projector.
•
Power: With this program you can set the device to automatically switch to standby mode
between 10 and 120 minutes as you wish.
•
Storage: here you can see the internal storage space.
•
Display: see the projector chapter
•
Reset: this program allows you to reset the device to its factory default state.
- Remote and accessories: Via this menu, you could connect devices by Bluetooth (see chapter
Bluetooth connection).
(Fig. 9)
Memory clean
In the « SETTINGS » page, select « Memory clean ». a new page appears on which you could see the use of
the internal memory of the device of the device and the applications open in the background.
3 actions are possible on this screen:
- Free memory: when you activate this feature, the device performs a cleaning of its internal memory.
This does not delete the files you have stored on the device. This feature only removes temporary files
that allow the device to run faster.
- Enable or disable the alert option when there's less than 10% of the memory left.
- Stop applications running in the background: go to the application in question and press the "OK"
button on the remote control.
www.livoo.fr
EN