Samsung PS50A470 Manual Del Usuario página 24

Changing the Format
Select the optimal input format to match your graphic cards or 3D
software.
See the descriptions for Steps 1 to 4 above.
5 Press the ▲ or ▼ button to select Format, then press the
ENTER button.
6 Press the ▲ or ▼ button to select Checker Board, Horizontal
or Vertical then press the ENTER button.
Checker Board
Horizontal
Vertical
➢
You can press the D button on the remote control
repeatedly to change the 3D mode.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ◄ or ► button to select D Mode.
3 Press the ENTER button to start the 3D Effect.
Resetting the Picture Settings to the Factory Defaults
You can set detailed picture settings.
1 Press the MENU button to display the menu.
 Press the ENTER button to select Picture.
 Press the ▲ or ▼ button to select Reset, then press the
ENTER button.
4 Press the ▲ or ▼ button to select OK or Cancel then press
the ENTER button.
➢
Each mode can be reset.
BN68-01528A-Eng.indb 24
If the output format of your graphic card or 3D
software is Checkerboard, select this input
format.
If the output format of your graphic card or 3D
software is Horizontal interleaved, select this input
format.
If the output format of your graphic card or 3D
software is Vertical interleaved, select this input
format.
English - 4
T V D Effect
Mode : Mode 1
Format :
Checker Board
Horizontal
Vertical
Move Enter
Tools
3D Effect ◄ Off
Anynet+ (HDMI-CEC)
Picture Mode : Dynamic
Sound Mode : Standard
Sleep Timer :
SRS TS XT :
Energy Saving :
Move
Adjust
T V Picture
Mode : Standard
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint G50
Detailed Settings
Picture Options
Reset : OK
Cancel
Move Enter
Return
►
Off
Off
Off
Exit

5
45
50
50
R50
OK
Return
2008-04-18 오후 1:44