Characteristics; Elements; Fitting The Cards On The Umx-01/0; Connection - Optimus UMX-MP3 Manual De Instrucciones

ENGLISH

1. Characteristics

MP3 format Message player for the UMX-01/0 audio atrix.
Uses SECURE DIGITAL (SD) type removable memories. The memory is supplied with the card.
Supports storage of 9999 messages of variable duration. The recording capacity varies according to the SD
used (approximately 1MB x minute).
The messages can be activated through the strip of the UMX-MP3 card itself, from a SMP-94RS desk
connected to a UMX-94R card, from UMX-ECT cards (the UMX-94R and UMX-ECT cards must be on the same
chassis as the UMX-MP3) or from a PC in the SMP250 system.

2. Elements

1. Contact activated LED indicators.
2. Strip for external activation of messages.
Eng
3. SD type removable memory.
4. Memory protector.
3. Fitting the cards on
the UMX-01/0
1. Turn the front switch on the UMX-01/0 to
the OFF position or disconnect the power
strip.
2. Unscrew the
remove the blank panel from the position
where it is wished to fi t the card.
3. Insert the card.
4. Fasten the attachment screws.

4. Connection

The connection varies according to the activation mode:
4.1. Activation by pulse
7 messages / sequences can be activated (from the contacts of the
same UMX-MP3 card). If it is wished to activate more messages, UMX-
ECT cards must be added. The UMX-MP3 and UMX-ECT cards must be on
the same UMX-01/0 chassis.
The pulse must be at least of 500ms.
To stop playing the message, contact M8 (Start/Stop) must be
activated.
10
UMX-MP3
MP3 Message Playing Card
attachment screws and
(see fi gure 3)
1
2
Figure 2
Message
activation
Message
activation
Message
activation
Message
activation
Message
activation
Message
activation
Message
activation
STOP
Figure 1
MP3 PLAYER MP3 PLAYER
UMX-MP3
4
M1 M5
M2 M6
M3 M7
M4 M8
3
M1
M2
M3
M4
M5
M6
M7
M8 (Start/Stop) M8 (Start/Stop)
ACK
GND
Figure 3
M1
M2
M3
M4
M5
M6
M7
M8 (Start/Stop)
ACK
GND
UMX-MP3 v1.2