Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Audio Level Adjust (-5 dB by default): Through this parameter
8
the audio level of the MP3 messages of the card can be
attenuated (0dB=without attenuation).
Contacts Confi guration: This opens the confi guration window
9
of the input contacts of the UMX-MP3 card.
Choose a contact and select MP3 Message
10
If Binary has been selected in Activation Mode,
it is NOT possible to access the confi guration of
the contacts.
In such a case, go directly to
If Pulse been selected in Activation Mode, it is
NOT possible to confi gure contact 8.
Eng
Press the Confi g. button.
11
Contact number. The programme automatically associates a
12
logical contact number.
Name: Enter a name to identify the contact (maximum 7
13
characters).
Associated input: The name entered in
14
Click on the Confi g. button to associate zones and groups with
15
the contact. These zones and groups will be the destination of
the MP3 message when the contact is activated.
Select the zones and groups and press Ok.
16
To select several zones and/or groups, hold
the Ctrl. key down while zones or groups are
selected.
Enter a priority level (between 0 and 63, 0 being the value of
17
maximum priority).
Enter the number or numbers of messages that the contact
18
must activate. If several messages are entered, i.e. a
sequence, these must be separated by a comma (for example:
2,3,7,8).
Enter the number of repetitions.
19
Enter the time between repetitions. If continuous repetition
20
is required, establish the time at 0 min, 1 sec. and activate
priority between repetitions
Press Ok.
21
If you wish to confi gure another contact, repeat steps
Otherwise, press Ok in the various windows (
confi guration will be saved.
12
UMX-MP3
MP3 Message Playing Card
.
22
appears.
3
.
7
10
and
) and the
22
23
Figure 7
10
9
22
9
Figure 8
9
19
20
9
21
9
Figure 9
to
.
21
11
9
12
9
13
9
14
9
15
9
17
9
18
9
16
9
UMX-MP3 v1.2
Publicidad
Capítulos
Tabla de contenido
