Samsung LE23R8 Manual De Instrucciones página 17

Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
1. Press the menu button to display the menu.
Press the enter/oK button, to select "Picture".
2. Press the enter/oK button again, to select "Mode".
. Press the ▲ or ▼ button to select the desired picture effect.
Press the enter/oK button.
. Press the exIt button to exit.
 Dynamic: Selects the picture for high-definition in a bright
room.
 Standard: Selects the picture for optimum display in a
normal environment.
 movie: Selects the picture for comfortable display in a
dark room.
The Picture mode must be adjusted separately for each input
source.
You can return to the factory defaults picture settings by
selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory
Defaults" on page 19)
adjusting the Custom Picture
Your set has several settings which allow you to control
picture quality.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select a particular item.
Press the enter/oK button.
. Press the ◄ or ► button to decrease or increase the value of
a particular item. Press the enter/oK button.
. Press the exIt button to exit.
 Contrast: Adjusts the lightness and darkness between objects and the background.
 Brightness: Adjusts the brightness of the whole screen.
 Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
 Colour: Adjusts the colours, making them lighter or darker.
 tint (ntSC or DtV only): Adjusts the colour of objects, making them more red or green for a more
The adjusted values are stored according to the selected Picture mode.
In PC Mode, Only "Contrast" and "Brightness" can be adjusted.
"Tint" function is available only in "HDMI" and "Component" mode.
natural look.
english - 1
tV
Picture
mode : Dynamic
Contrast
Brightness
Sharpness
Colour
tint g0
Colour tone : Cool1
Detailed Settings
Backlight : 10
more
move enter
tV
Picture
mode : Dynamic Dynamic
Standard
Contrast
Brightness
Sharpness
Colour
tint g0
Colour tone : Cool1
Detailed Settings
Backlight : 10
more
move enter
You can also press the
P.moDe button on the remote
control to select one of the
picture settings.
tV
Picture
mode : Dynamic
Contrast
Brightness
Sharpness
Colour
tint g0
Colour tone : Cool1
Detailed Settings
Backlight : 10
more
move enter

100
0


r0



return
100
movie 0


r0
return

100
0


r0



return