Husky HOTC5209B11M Guía De Uso Y Cuidado página 6

Assembly
1
Attaching the side handle
□ Attach the side handle (B) to the cabinet using four bolts
(AA).
□ Tighten all bolts with the 10mm wrench (DD).
NOTE: The holes in the cabinet are tapped and do not
require nuts.
AA
3
Attaching the power strip brackets
□ Attach the power strip brackets (H) to the cabinet using four
bolts (AA).
□
Tighten all bolts using a screwdriver.
Do not over tighten the bolts to avoid damage to the finish.
NOTE: The holes in the cabinet are tapped and do not
require nuts.
All manuals and user guides at all-guides.com
□
□
H
AA
2
Installing the casters
CAUTION: Do not over tighten the screws.
□ Ensure all drawers are securely locked into place using
the key (I) and lock (J) on the rolling cabinet (C).
□ Lay the rolling cabinet (C) on its back. Use the
packaging material to protect the finish.
□ Mount the two swivel casters with brake (D) to the rolling
cabinet (C) using four bolts (BB) per caster. The s wivel
casters with brake (D) should be installed on the same
side as the side handle (B) .
□ Mount the two rigid casters (G) to the rolling
cabinet (C) using four bolts (CC) per caster.
□ Tighten all bolts with a 13 mm wrench (DD).
□ Return the rolling cabinet (C) to its upright position.
G
BB
4
Installing the drawer liner
□ Place the drawer liners in appropriately sized drawers
and the chest lid area to protect the surface.
K
6
C
D