Publicidad
Idiomas disponibles
Idiomas disponibles
Operating an iPod directly
— Passenger control
You can operate an iPod directly even when
it is connected to the unit.
1
During playback, press and hold
.
"MODE IPOD" appears and you will be
able to operate the iPod directly.
To exit the passenger control, press and
hold .
"MODE AUDIO" will appear and direct
operation of the iPod will not be possible.
Note
The volume can be adjusted only by the unit.
12
App Remote
Downloading the "App Remote"
application from App Store
iPhone.
If the application is downloaded to iPhone
and connected to the unit, the following
features are available:
– Operate the unit to launch and control
compatible applications on iPhone.
– Operate iPhone with simple finger
gestures to control the source of the unit.
– Display detailed source information (song
title, artist name, album art, etc.) on
iPhone.
Available operations differ depending on
the application. For details on available
applications, visit the support site on the
back cover.
Notes
• For your safety, follow your local traffic laws
and regulations, and do not operate the
application while driving.
• The "App Remote" application is only available
for iPhone with iOS 5 installed.
Two-way Music Control
with iPhone
1
Connect iPhone to the USB port with
its connection cable*.
* RC-100IP USB connection cable for iPhone
is recommended.
2
Start up the "App Remote" application.
3
Press and hold (APP) on the
unit for more than 2 seconds.
Connection to iPhone starts.
When connection is established, the
name of application on iPhone appears
when selecting a source, and some
playback operations for the application
is required for
SM
Publicidad
