Publicidad
Idiomas disponibles
Idiomas disponibles
INPUTS AND OUTPUTS
SD card input:
Here you can connect an SD card to the device to store or display pictures or
videos. The SD card must be formatted in FAT32 format.
HDMI output:
The HDMI output allows you to display the document camera image on a dis-
play device with an HDMI cable.
VGA Input:
Via the VGA IN connector, another VGA signal (e.g. from a laptop) can be
looped through to the display when the visualizer is not in use.
VGA Output:
Via the VGA output, you can display the image of the document camera or the
source connected to the VGA-IN connector on a display device.
USB port:
Via the USB output you can display the image from the document camera on
a PC (best with the celexon Visualizer software). A HID-compliant mouse can
also be connected here to control the menu.
USE WITHOUT COMPUTER
1.
Connect the device with the enclosed HDMI or VGA cable (image transfer)
and if desired a USB 2.0 A-B printer cable (available separately - for touch
transfer) to your display device.
2.
Connect the power supply to the mains.
3.
Now press the on/off switch on the document camera to turn it on.
4.
If your display does not have an automatic source selection, select the sig-
nal input on your display accordingly.
5.
The device is ready for use and can be controlled by touch commands on
the display if your display supports this function and it is connected via
USB.
6
Publicidad
