Celexon DK800 Manual De Instrucciones página 18

USE WITH COMPUTER
Option 1:
1. Connect the device to a computer with the included USB cable.
2. Connect the power cable to the power supply.
3. Press the on/off button on the document camera.
4. The transmission can now be controlled by a supporting software, like e.g.
celexon Visualizer software, on your computer to start the transmission.
5. The selection keys on the Visualizer cannot be used under these settings.
The control is done by the software.
6. With the built-in microphone, the document camera can also be used for
video calls or recording of learning content, etc.
Option 2:
1. Connect a computer to the document camera via VGA cable and use the
VGA input.
2. Connect the display device to the document camera via VGA cable using
the VGA output.
3. Connect the power supply to the mains.
4. When the document camera is turned off, the computer's image is display-
ed by the display device. As soon as you turn on the document camera,
the image from the camera is played back on the display device. Switching
between the two sources is only possible by switching the document ca-
mera on and off.
Hint:
The DK800 can be used with many PC softwares that support image input
devices such as USB webcams or scanners.
Mouse function:
You can operate the document camera with a computer mouse connected
to the USB interface. You can also add graphical comments by selecting the
"Comments" field, graphical comments can be drawn in the image.
7