Descargar Imprimir esta página

cecotec TV 0 0024 Serie Manual De Instrucciones página 35

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
ENGLISH
Fig. 5
First installation
Connect an RF cable to the "RF-In" input of the TV and to the input of your TV antenna.
Select Language
Press
/
to select the system language.
Select the Country
Press ▼ / ▲ to highlight the "Country" option.
Press
/
to select the country you want.
Fig. 6
Fig. 7
Automatic tuning
To automatically tune your TV, press "Menu" and left arrow button to skip ATV tuning; do the
same to skip DTV tuning.
Fig. 8
WARNING:
Do not place the TV in an unstable place to prevent it from falling and causing injury or damage.
Many injuries can be avoided by taking basic precautions such as:
1.
Use cabinets or supports recommended by the manufacturer of the television.
Only use furniture that can safely support the weight of the TV.
2.
3.
Make sure that the television does not protrude from the edge of the supporting furniture.
4.
Do not place the television on tall furniture (for example, cabinets or bookcases) without
securing both the furniture and the television to a suitable support.
Do not place tablecloths or other materials between the television and the supporting
5.
furniture.
6.
Educate children about the dangers of climbing on furniture to reach the TV or remote.
Consider the above if you want to move the TV to another place.
3. CONTROLLER BUTTONS AND INTERFACE
Controller buttons
Show/Hide Icon: When the icon is not displayed, please press the corresponding button: the
button icon will appear as shown in the figure above, and it will automatically turn off after 5
seconds of inactivity.
Icon selection: short press the corresponding button and move right to select the icon.
Icon function selection: long press the button to get the selected icon function.
T V 0 S ERIES 0 0 24/TV 0 SERIE S 0 032
68
Icon Description:
Switch-off icon It corresponds to the "POWER" button on the remote control.
Menu icon: It corresponds to the "MENU" button on the remote control.
Source icon: It corresponds to the "SOURCE" button on the remote control.
CH+ icon (go to next channel): It corresponds to the "CH+" button on the remote control.
CH- icon (go back to the previous channel): It corresponds to the "CH-" button on the
remote control.
Volume icon+ (increase volume) Corresponds to the "VOL+" button on the remote control.
Volume icon- (decrease volume): It corresponds to the "VOL-" button on the remote control.
Interface
AV Input
External AV signal input and right/left sound channel
CI SLOT
Common Interface (CI) card slot requires Conditional Access
Module (CAM) for Pay TV.
HDMI Input
Digital signal input from the HDMI video connector
ANT 75
Input for the connection of the antenna/cable (75/VHF/UHF).
USB input
Insert a USB device here to play your media files or record
programs using the PVR function.
COAXIAL
To connect the SPDIF receiver.
Please keep away, protect, and do not touch the HDMI and USB terminals of the TV to
extend the life of the TV and ensure proper operation.
External device connection scheme
Check figure 2.
Fig. 2 key:
1.
DVD
2.
Set-Top Box
3.
AV Input Connector
HDMI Input Connector
4.
TV 0 SERIES 0024/TV 0 S ERIES 0032
ENGLISH
69

Publicidad

loading

Este manual también es adecuado para:

Tv 0 0032 serie